##
## $Id: cisco-load.exp 2997 2014-12-30 19:20:07Z heas $
##
##
## Copyright (c) 1997-2015 by Terrapin Communications, Inc.
## All rights reserved.
##
## This code is derived from software contributed to and maintained by
## Terrapin Communications, Inc. by Henry Kilmer, John Heasley, Andrew Partan,
## Pete Whiting, Austin Schutz, and Andrew Fort.
##
## Redistribution and use in source and binary forms, with or without
## modification, are permitted provided that the following conditions
## are met:
## 1. Redistributions of source code must retain the above copyright
##    notice, this list of conditions and the following disclaimer.
## 2. Redistributions in binary form must reproduce the above copyright
##    notice, this list of conditions and the following disclaimer in the
##    documentation and/or other materials provided with the distribution.
## 3. All advertising materials mentioning features or use of this software
##    must display the following acknowledgement:
##        This product includes software developed by Terrapin Communications,
##        Inc. and its contributors for RANCID.
## 4. Neither the name of Terrapin Communications, Inc. nor the names of its
##    contributors may be used to endorse or promote products derived from
##    this software without specific prior written permission.
## 5. It is requested that non-binding fixes and modifications be contributed
##    back to Terrapin Communications, Inc.
##
## THIS SOFTWARE IS PROVIDED BY Terrapin Communications, INC. AND CONTRIBUTORS
## ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
## TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
## PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE COMPANY OR CONTRIBUTORS
## BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
## CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
## SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
## INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
## CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
## ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
## POSSIBILITY OF SUCH DAMAGE.
# 
#  The expect login scripts were based on Erik Sherk's gwtn, by permission.
# 
#  The original looking glass software was written by Ed Kern, provided by
#  permission and modified beyond recognition.
#
# This expect snippet is sourced by clogin (-s option) to load a configuration
# file (named <routername>-confg into nvram from an rcp/tftp host.  This is an
# _example_ as it not guaranteed to work for all applications.  PLEASE test
# for your environment.
#
# It expects the following variables via the -E option:
#	rcphost		='host to rcp from' such as 'foo.org' or '192.168.0.1'
#	confgpath	='path under /tftpboot where configs are held'
#
# The config file is expected to be routername-confg, where routername is the
# name as grok'd from the router's cmd-line prompt
#
# example usage:
# % clogin -s ./cisco-load.exp -Ercphost=foo.shrubbery.net router
# router
# loading router config from foo.shrubbery.net
#
# exit is called at the end, so only one router can be handled per clogin.
#
# Keep in mind that it is important to NOT polute the global variable space.
# Particularly, do not use variables used within clogin.  This may result in
# indeterministic results.  An easy way to avoid this is to use a variable
# name prefix (like 'E' or '_').
#
# Useful variables from clogin global space:
#	router		router name as provided on the cmd-line
#	prompt		cmd-line prompt as determined by clogin
#
# note: the tcl/expect parser is extremely stoopid.  Comment lines are NOT
#	completely ignored!!  so, a '{' or '}' in a comment might produce
#	unexpected results.
##
# log_user 1
# exp_internal 1

# sometimes this is a bit slow.  note: this overrides clogin -t
set timeout 90

# take rcp host from -Ercphost='foo'
if ([info exists Ercphost]) {
	#puts "CONFGHOST == $Ercphost"
	set confghost [string tolower $Ercphost]
} else {
	send_error "ERROR: -Ercphost= was not set on the command-line.\n"
	exit
}

#
# logout of the router
#
proc logout { ecode } {
    global prompt

    send "quit\r"
    expect {
	"$prompt"	{ logout $ecode }
	timeout { send_error "Error: timeout waiting for EOF after quit\n"}
	eof		{
			  send_user "\n"
			  exit $ecode
			}
    }
}

#
# erase the nvram
#
proc erase { } {
    global prompt

    send "\r"
    expect $prompt {}
    send "write erase\r"
    expect {
	-re " Continue\[^\n\]\*confirm\]" {
			  send "\r"
			  exp_continue
			}
	"$prompt"	{ }
	timeout		{
			  send_error "Error: timeout waiting for write erase.\n"
			  logout 1
			}
	eof		{ logout 1 }
    }
}

#
# load a config via rcp into nvram
#
proc doload { confghost routername config retry } {
    global prompt

    # send a return just to be sure we have a prompt.
    send "\r"
    expect	"$prompt"
    # start the copy and send the host to load from
    # use tftp if retry == 1
    if { $retry == 0 } {
	send "copy tftp startup-config\r"
    } else {
	send "copy rcp startup-config\r"
    }
    expect {
		timeout	{
			send_error	"\nError: timeout exceeded waiting for rcp/tftp host prompt\r"
			logout 1 }
		"mbiguous command" {
			if { $retry == 0 } {
			    send "copy tftp: startup-config\r"
			} else {
			    send "copy rcp: startup-config\r"
			}
			exp_continue }
		-re "Host or network .*\]\?" {
			send	"host\r"
			exp_continue }
		"\]\?" {
			send	"$confghost\r" }
    }

    #
    # fill in the rest of the blanks.  username (12.0), filename, dest, etc.
    #
    expect	{
	-re "Source username .\*\]\?" {
		send	"$routername\r";
		exp_continue }
	-re "Source filename .\*\]\?" {
		send	"$config\r";
		exp_continue }
	-re "Name of configur.\*\]\?" {
		send	"$config\r";
		exp_continue }
	-re "Destination filename .\*\]\?" {
		send	"startup-config\r";
		exp_continue }
	-re "Configure using .\*confirm\]"	{ send	"\r" }
	"proceed\? \\\["			{ send	"yes\r" }
	-re "Do you want to over write.\*confirm\]"	{ send	"\r" }
	-re "Accessing (rcp|tftp):"		{ }
	timeout {
		send_error "\n\tError: timeout exceeded while matching load prompts\n";
		send "" }
    }

    expect {
	timeout {
		send_error "Error: timeout exceeded while loading config\n"
		logout 1 }
	-re "\[^\n\]*Connection refused" {
		send_error "Error: $expect_out(0,string)\n"
		logout 1 }
	-re "\[^\n\]*Destination unreachable" {
		send_error "Error: $expect_out(0,string)\n"
		logout 1 }
	-re "\[^\n\]*Permission denied" {
		send_error "Error: $expect_out(0,string)\n"
		logout 1 }
	-re "\[^\n]*No such file or directory" {
		send_error "Error: $expect_out(0,string)\n"
		logout 1 }
	-re "\[^\n]*Error copying\[^\n]*Not enough space on device\[^\n]*\r" {
		send_error "Error: $expect_out(0,string)\n"
		if { $retry == 2 } {
# erase stomps ssh rsa key
#    			send_user "erasing nvram\n"
#			erase
    			send_user "retrying load\n"
			doload $confghost $routername $config 1
		} elseif { $retry == 1 } {
# erase stomps ssh rsa key
#    			send_user "erasing nvram\n"
#			erase
    			send_user "retrying load with tftp.\n"
			doload $confghost $routername $config 0
		} else {
			send_error "Error: $expect_out(0,string)\n"
			logout 1
		} }
	-re "\[^\n]*.*configuration is too large.*\n" {
		send_error "Error: $expect_out(0,string)\n"
		expect {
			-re "\[^\n]*Truncate config.*:" { send "no\r" }
			}
		logout 1 }
	-re "\[^\n]*Error (opening|copying).*\r" {
		send_error "Error: $expect_out(0,string)\n"
		logout 1 }
	-nocase -re "\[^\n]* error\[^a-z\n]+\[^\n]*" {
			  send_error "$expect_out(0,string)\n"
			  logout 1
			}
	"\n"		{ exp_continue }
	-re "^\[^ ]*\#"	{
		send_user "load successful.\n"
		}
    }

    return 0;
}

send_user "loading $router config from $confghost\n";

# look for router hostname in prompt (i.e.: deal with fqdn)
send "\r"
expect {
    timeout 	{
	send_error "Error: did not receive prompt\n"
	exit }
    "\n"	{ exp_continue }
    -re "^(\[^ ]*)\#" {
	set routername $expect_out(1,string) }
}

# deal with config subdir?  from Econfgpath
if ([info exists confgpath]) {
	set config	"$confgpath/$routername-confg"
} else {
	set config	"$routername-confg"
}

# load the config
if { [doload $confghost $routername $config 1] != 0 } {
    logout 1
}

logout 0

# these were my original transcripts of performing loads.  it is a useful
# example of info you may collect to get an idea of what needs to be handled
# in the expect{}s
#
#  pdx-oob#
#  pdx-oob#copy rcp start
#  Address of remote host [255.255.255.255]? 205.238.52.35
#  Name of configuration file [a]? pdx-oob-confg
#  Configure using pdx-oob-confg from 205.238.52.35? [confirm]
#
#  Connected to 205.238.52.35
#  Loading 8131 byte file pdx-oob-confg: !!!! [OK]
#  Compressing configuration from 8131 bytes to 3886 bytes
#  [OK]
#  pdx-oob#
#

#  12.0S-isms
#  pao2#cop rcp sta
#  Address or name of remote host []? eng0
#  Translating "eng0"...domain server (205.238.52.46) [OK]
#
#  Source username [pao2]? 
#  Source filename []? pao2-confg
#  Destination filename [startup-config]? 
#  Warning: Copying this config directly into the nvram from a network server may
#           cause damage the the startup config. It is advisable to copy the file
#           into the running config first, and then save it using copy run start.
#  Do you wish to proceed? [no]: yes
#  Accessing rcp://pao2@eng0/pao2-confg...
#  Connected to 205.238.52.35
#  Loading 30138 byte file pao2-confg: !!!!!! [OK]
#
#  30138 bytes copied in 2.576 secs (15069 bytes/sec)
#  pao2#
# OR IS IT
#  sea0#cop rcp sta
#  Address or name of remote host []? eng0
#  Source username [sea0]? 
#  Source filename []? sea0-confg
#  Destination filename [startup-config]? 
#  Accessing rcp://sea0@eng0/sea0-confg...!!!!!!!!!!!!!!!!!!
#  89794 bytes copied in 0.704 secs
#  sea0#q
#  Connection closed by foreign host.

#  pdx-oob#copy rcp start
#  Address of remote host [255.255.255.255]? 205.238.52.35
#  Name of configuration file [a]? pdx-oob-confg
#  Configure using pdx-oob-confg from 205.238.52.35? [confirm]
#
#  Connected to 205.238.52.35
#  Loading 8131 byte file pdx-oob-confg: !!!! [OK]
#  Compressing configuration from 8131 bytes to 3886 bytes
#  [OK]
#  pdx-oob#copy rcp start
#  Address of remote host [205.238.52.35]? 205.238.52.35
#  Name of configuration file [pdx-oob-confg]? pdx-oob-confg
#  Configure using pdx-oob-confg from 205.238.52.35? [confirm]
#
#  Connected to 205.238.52.35
#  %rcp: /tftpboot/pdx-oob-confg: No such file or directory
#  pdx-oob#
#

#  pdx-oob#copy rcp start
#  Address of remote host [205.238.52.35]? 205.238.52.35 
#  Name of configuration file [pdx-oob-confg]? pdx-oob-confg 
#  Configure using pdx-oob-confg from 205.238.52.35? [confirm]
#
#  Connected to 205.238.52.35
#  %rcp: /tftpboot/pdx-oob-confg: Permission denied
#  pdx-oob#
#

#  *** response from filtered pkt
#  pdx-oob#copy rcp sta
#  Address of remote host [205.238.52.35]? 205.238.1.94
#  Name of configuration file [pdx-oob-confg]? 
#  Configure using pdx-oob-confg from 205.238.1.94? [confirm]
#  % Destination unreachable; gateway or host down
#
#  pdx-oob#
#

#  *** response from host w/o rcp daemon
#  pdx-oob#cop rcp sta 
#  Address of remote host [205.238.52.35]? 205.238.1.66
#  Name of configuration file [pdx-oob-confg]? 
#  Configure using pdx-oob-confg from 205.238.1.66? [confirm]
#  % Connection refused by remote host
#
#  pdx-oob#
#
